Biosonic General Purpose Cleaner and Rust Inhibitor. UC31 combines the proven cleaning action of a BioSonic solution with corrosion protection in the ultrasonic bath. It’s used for general cleaning.

Concentration 0.4% to be used in the ultrasonic bath diluted yield 76 liters.
Indication: UC31 combines the proven cleaning action of a BioSonic solution with corrosion protection in the ultrasonic bath. It’s used for general cleaning.
Items: Instruments crowns, bridges, burs, dentures and ultrasonic scaler tips
Special notes: Use as a carrier bath in ultrasonic tank. Can also be used as instrument pre-soak and carrier bath in tank when using beakers. After cleaning thoroughly clean with tap water 

The new BioSonic UC31 General Purpose Cleaner combines the proven cleaning action of a BioSonic solution with corrosion protection in the ultrasonic bath. BioSonic UC31 comes in easy to use unit dose packets that make 2–4 liters of solution each. The concentrated liquid readily mixes in cold and warm water. As compared to powder no stirring is required to mix the UC31 concentrate in the bath. The practical dispenser box contains 20 unit dose packets. 


gke Cleaning Process Indicator for your Ultrasonic Bath using BioSonic Cleaner & Rust Inhibitor: 

With a dosage of 30ml  (2 packets) (7.5 ml / L) and a minimum cycle time of 20 minutes, the Green gke Cleaning Process Indicator (GK-C810-201) is the appropriate choice for this detergent.